#WELL PUMP WIRE SPLICE KIT INSTALL#
#WELL PUMP WIRE SPLICE KIT PORTABLE#

Typical Dimensions of Cable Joints 3M Cable Joint Kit **Base multi-conductor selection on cable O.D.

#WELL PUMP WIRE SPLICE KIT PORTABLE#

*Mine portable cable rating of 600/2000 Volts. Submersible Cable Joints – 3M Scotchcast 82F 82BF Cable Splicing Kits 3M Cable Splicing Kit Number

Smooth tapered cable splice profile – eliminates cable hang-ups and splice end-lifting.

Semi-flexible cable compound – allows “permanent” splice to bend with cable for installation, handling, reeling, etc.

3M Scotchcast Flame-Retardant Compound 2131 – self-curing resin bonds to itself and most modern cable jackets, and requires no torch or other external heat source forms a splice or repair that is abrasion resistant and flame retardant.

MSHA Accepted – carries Mine Safety and Health Administration acceptance 07-KA060002-MSHA.

Submersible Cable Joints – 3M Scotchcast 82F 82BF Cable Splicing Kits Features & Benefits The 3M Scotchcast 82-F & 82-BF Series of flexible cable joints suit the following cable sheath/jacket materials:

Comprehensive Jointing instructions showing proper installation techniques for splicing non-shielded portable power cables and cords.

3M Three-M-lte Elek-Tro-Cut Abrasive cloth (80J grit).

3M Sc otch 23 Tapefor sealing cable joint mould ends.

Scotchcast 2130 Compound in 3M “Unipak” container.

Submersible Cable Joints – 3M Scotchcast 82F 82BF Cable Splicing Kit Contents Used also for cable sheath jacket repairs. The flexible Scotchcast resin allows the joint to bend with the cable for trailing, reeling and coiling applications – Scotchcast 2131 is self-curing (cold-curing) without resort to heat and heating torches.

Demould– when the jointing compound is filler spout is no longer tacky, trim off excess compound from filler spout.

Pour Compound – mix Scotchcast 2131 resin in “Unipak” and pour into the cable joint mould.

#WELL PUMP WIRE SPLICE KIT INSTALL#

Install Mould – trim ends to accommodate the cables, Fig 1, centre over joint and tap ends to hold in place.

Insulate Connections – use vinyl electrical tape (not required if insulated butt connectors are used).

Connect Cables – use compression inline connectors for 82-F kits and compression “C” tape connectors for 82-BF1 kits.Prepare Cables – using standard industry procedures and cable jointing tools.Installation Technique For 3M 82-F & 3M 82-BF Cable Jointsĭetailed Jointing Instructions are included in each cable joint kit – here is a summary of the installation steps for these cable joints: The 3M Scotchcast 82-BF1 branch tap cable joint kits can accommodate cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating) ranging in diameter from 0.25 – 0.8 inches (6-20mm) with a maximum single conductor size of 1/0 AWG. Typically, the branch joint kit will accommodate single-conductor 50sqmm cables. Typically, the inline joint kit will accommodate single-conductor 120sqmm cables. The combined cable diameter range for these is 0.25 – 1.2 inches (6-30mm), with a maximum single conductor size of 4/0 AWG. The 3M Scotchcast 82-F1 and 82-F2 inline straightcable joint kits are rated up to 5kV for single conductor and up to 1kV for multiple conductors. The Scotchcast range of resins manufactured by 3M Electrical are suitable for jointing and repairing non-armoured portable power cables and cords in both indoor and outdoor locations: The Scotchcast 2131 resin for durability, flexibility, moisture sealing and flame retardancy.ģM Scotchcast 82F cable joints are suitable for seawater applications. Thorne & Derrick | 3M Distributed from Stock | Approved Supplier | UK & Export Salesįlexible Submersible Power Cable Joint Kits 82-F & 82-BF SeriesģM Scotchcast submersible cable joints are flexible inline and tap splices for use on non-shielded portable power cables and cords, coaxial cables, subsea umbilicals, marine and offshore shipwiring cables 600/1000v – this includes offshore power and instrumentation topsides cables to IEC/NEK606 and halogen-free mud resistant cables ( BFOU and RFOU) types.ģM Scotchcast cable joint kits are used to repair, connect and joint submersible motor pump cables – this includes in both straight, branch and tap-off cable configuration.ģM Scotchcast 82-F submersible cable joints utilise Scotchcast 2131 flexible, flame retardant and seawater resistant resin and are compatible with EPR, neoprene, hypalon, PVC and nitrile cable sheaths.

Submersible Cable Joints – 3M Scotchcast 82F 82BF Cable Splicing Kits

Well pump wire splice kit